Recent Posts

Pages: 1 ... 4 5 [6] 7 8 ... 10
51
Discussion (English preferably) / Re: Do you have a problem with the two pots on the right side of the keyboard?
« Last post by reno@phonogen.com on February 01, 2021, 06:50:43 PM »
Ohh 😮! Than this post is obsolete!

🙏 Laurent
52
Discussion (English preferably) / Re: Your wishes ;)
« Last post by maisonvague on February 01, 2021, 11:55:53 AM »
Quote from: VE on January 27, 2021, 02:21:27 PM
If it's technically possible, can you add an option on the OPTIONS or SYSTEM menu giving us the choice to bypass or not the 8 individual outputs even if cables are connected on them?
It's not practical at all to unplug all 8 jacks to the individual outputs when we want to send all 8 voices to the master output (for a global recording of The River, including FX if we use them) and then have to replug all 8 cables to the individual outputs at the back when we prefer a surgical and pure recording of each River's voice?

My solution is to have the cables already inserted but not entirely. They can be inserted approximately 2/3s of the way in before they will engage and remove the voice from the main mix at the sound of a "click". This way, all that’s needed is to simply reach behind and pull them partially out or insert them all the way in. It literally takes only seconds to reconfigure and can be done blind by counting cables left-to-right (meaning you don't have to see the back of The River) beginning with Voice 8 on the left.
53
Discussion (En français de préférence) / Re: USB midi In en miroir sur Midi out?
« Last post by Baloran on February 01, 2021, 01:04:20 AM »
BOnjour Yves,

Non, enfin, si tu parles de la prise USB Panel ;) Celle ci n'est pas prise en charge par les routages de The Riverkey.
54
Discussion (English preferably) / Re: Your wishes ;)
« Last post by Baloran on February 01, 2021, 01:00:53 AM »
Quote from: VE on January 27, 2021, 02:21:27 PM
If it's technically possible, can you add an option on the OPTIONS or SYSTEM menu giving us the choice to bypass or not the 8 individual outputs even if cables are connected on them?
Sorry, not possible, it's a hardware switch on jack socket ;)
55
Discussion (English preferably) / Re: Do you have a problem with the two pots on the right side of the keyboard?
« Last post by Baloran on February 01, 2021, 12:58:05 AM »
Thanks reno !
 In the version 2.13, this setting is no longer available ;)
56
Logiciels/MAJ/Softwares/Updates / Last version 2.13
« Last post by Baloran on February 01, 2021, 12:56:46 AM »
Hi

La version 2.13 est en ligne. Elle corrige le problèmes des CVs + Gates mal configurées et permet de désactiver complètement les pédales 1 et/ou  2. Le réglage encodeur 2 ou 4 steps n'est plus disponible.
Cette version devrait être une stable. Mais je n'ai qu'un testeur. Si vous n'êtes pas à l'aise avec les mises à jour, attendez le feu vert. Sinon, je suis impatient d'avoir vos avis.

Version 2.13 is online It fixes the problem of badly configured CVs + Gates and allows to completely disable pedals 1 and/or 2. The 2 or 4 steps encoder setting is no longer available. This version should be a stable one. But I have only one tester. If you are not comfortable with the updates, wait for the green light. Otherwise, I'm looking forward to hearing from you.
57
Discussion (English preferably) / Do you have a problem with the two pots on the right side of the keyboard?
« Last post by reno@phonogen.com on January 27, 2021, 05:04:23 PM »
Do you have a problem with the two pots on the right side of the keyboard? Do they always skip a parameter? Then the command S and the highest "b" on the keyboard (2stp/4stp) will help you.  I have accidentally adjusted this once, so that the two pots suddenly seemed to be defective. Can happen quickly as a beginner, if you just press around. Have fun with the River!
58
Discussion (English preferably) / Re: Your wishes ;)
« Last post by VE on January 27, 2021, 02:21:27 PM »
Hi Laurent,

If it's technically possible, can you add an option on the OPTIONS or SYSTEM menu giving us the choice to bypass or not the 8 individual outputs even if cables are connected on them?
It's not practical at all to unplug all 8 jacks to the individual outputs when we want to send all 8 voices to the master output (for a global recording of The River, including FX if we use them) and then have to replug all 8 cables to the individual outputs at the back when we prefer a surgical and pure recording of each River's voice?

Quote from: Baloran on May 06, 2020, 07:25:15 PM
A Special summary screen show all outputs ;)
Nice!

Quote from: Baloran on June 10, 2020, 12:52:28 AM
Now to be able to say that for this sound, each note has to be played in 1,2,3 or 4 voices is interesting. I just simulated it with two to four identical layers. Ok for next version (2.0x). When you push Unisson, you can select full or 2,3,4 voices....
Great, I need to update my River and look at the latest firmware updates.
59
Discussion (English preferably) / Re: Your wishes ;)
« Last post by reno@phonogen.com on January 18, 2021, 06:23:00 PM »
Hello,

I was wondering if there is a list of undocumented S-Key commands. Just by accident I discovered on Gearslutz that my problem with my two pots on the right side of the keyboard can be fixed with the command S and highest "b" (2stp/4stp). Since I'm slowly going through (except for CV/Gate possibilities on the River), I'm actually asking for new users of the River. Exactly this thing with the 2/4stp can be done by randomly pressing the S and just one of the undocumented commands. A list would be of great help here. Thanks for the feedback!
60
Discussion (English preferably) / Re: EEPROM for The River and Support for IPAD / BEATSTEP
« Last post by Baloran on January 18, 2021, 12:56:07 PM »
Toutes les EEPROM demandées sont en cours d'envoi et un mail vous a prévenu.
Si vous n'avez pas reçu de mail et que vous voulez une EEPROM, merci de m'adresser un mail ainsi que votre adresse à laurent@baloran.com et EEPROM dans le sujet ;)
 
Pour mettre à jour l’EEPROM, une documentation a été créée,  téléchargeable ici
https://www.baloran.com/TheRiver/Manual/Open_The_River_and_replace_The_Triko_FX_EEPROM.pdf

Le manuel d’utilisation dernière version tient compte de cette nouvelle EEPROM.
https://www.baloran.com/TheRiver/Manual/The_River_Manuel_V2_2_FR_EN.pdf

----

All the requested EEPROMs are being sent and you have been notified by email.
If you have not received an email and you want an EEPROM, please send me an email with your address to laurent@baloran.com and EEPROM in the subject ;)
 
To update the EEPROM, a documentation has been created, downloadable here
https://www.baloran.com/TheRiver/Manual/Open_The_River_and_replace_The_Triko_FX_EEPROM.pdf

The latest version of the user manual takes into account this new EEPROM.
https://www.baloran.com/TheRiver/Manual/The_River_Manuel_V2_2_FR_EN.pdf
Pages: 1 ... 4 5 [6] 7 8 ... 10