Hello,
1. Is the conversion of WAVs to the Pool format near?
2. Could we have an option to have a specific temperament as default, always on, when we load different
patches or arps and sequences?
3. Is it possible to have the arp or seq running while loading different sounds?
Is the conversion of WAVs to the Pool format near?
Les fichiers sfp de The Pool sont des fichiers soundfonts "décodés". Le projet POLYPHONE https://www.polyphone.io/ me semble tout à fait excellent pour servir de base à la création de sf2 compatibles avec The Pool.
Il y a plusieurs contraintes à respecter , un seul son par SF2 et une longueur totale de tous les samples qui ne dépasse pas 6 Mo. Mais vous pouvez utiliser de nombreux samples, définir les bouclages etc...
Vous pouvez déjà mettre en ligne des sf2 que vous aimeriez voir sur The Pool, cela me permettra de tester l'outil (sommaire) de conversion sf2 vers sfp que je vais développer.
-----------------------------------------------------
The Pool's sfp files are "decoded" SoundFont files. The POLYPHONE project (https://www.polyphone.io/) seems to me to be an excellent starting point for creating sf2 files compatible with The Pool.
There are several constraints to follow: only one sound per SF2 file, and the total size of all samples must not exceed 6 MB. However, you can use as many samples as you like, set up loops, and so on...
You can already upload SF2 files that you'd like to see on The Pool; this will allow me to test the (basic) SF2-to-SFP conversion tool that I'm going to develop.
You will provide a ZIP file containing one or more WAV files. Without a descriptor file, each filename must specify its root note, for example C5.wav or C5_Caw.wav. The samples will then be mapped automatically across the keyboard.
For more control, you can include a CSV file, prepared in Excel, LibreOffice or Google Sheets, specifying each WAV's key range, actual pitch in Hz, loop points, level, and attack and release times.
You will then run a small command-line utility to convert the ZIP into an SFP file, ready to copy onto your The Pool's SD card.
Alternatively, you can provide an SF2 file created and tested in Polyphone, then run the dedicated script to convert it into an SFP file. ;)
It's good for you ?
-------------------------------------
Vous fournirez un fichier ZIP contenant un ou plusieurs fichiers WAV. Sans autre indication, le nom de chaque fichier devra préciser sa note de référence, par exemple C5.wav ou C5_Caw.wav. Les samples seront alors répartis automatiquement sur le clavier.
Pour davantage de contrôle, vous pourrez ajouter un fichier CSV, préparé dans Excel, LibreOffice ou Google Sheets, précisant pour chaque WAV la plage de notes, la fréquence réelle du son, les points de boucle, le niveau et les temps d'attaque et de relâchement.
Vous lancerez ensuite un petit utilitaire en ligne de commande qui transformera le ZIP en fichier SFP, à copier sur la carte SD de votre The Pool.
Vous pourrez également fournir un fichier SF2 créé et testé dans Polyphone, puis lancer le script dédié pour le convertir en SFP. ;)
Cela vous conviendrait ?
A slight change in the specifications: it won't be a command-line tool. It will be a small, simple, yet user-friendly application for both PC and Mac.
Petite évolution des spécifications, ce ne sera pas un outil en ligne de commande. Ce sera une petite application, simple mais conviviale PC et MAC donc.