Messages

Yes. I installed it a week ago.

I will do that.

Thanks

Hi Laurent

It solved the issue. 


Merci beaucoup

I have odd tuning etc problems in my River.  It is Out of tune and autotune don't fix it somehow. I can't use my River.

Info
I use 1.70 OS. After the autotune it's stays out of tune. And badly out.
Also presets are differently out of tune: One patch whole step lower and also out of tune. For example play c and the sound is d. And all the time out of tune!
Something is very messed up in my River.

I went back to the 1.61 OS. No impact. Then back to the 1.70 OS. No impact.
Before the autotune always worked and with normal warming time before autotune.

Display shows during the process in some voices the message:  Voice V= 2 VCF Err 1.

Is there something in the River Key system?

My River is been always on its keyboard stand.

Thank you maisonvague for your advices. I will adapt them.

If I send L,R stereo outputs to my DAW interface into the mono channel,  is there danger that the phase cancellation may happened?

I tried this: "Another method would be to pan voices either hard left or hard right on The River. " :
So I took a bass patch and hard pan it to L in The River. (With S+ Pot1 = Channel 1 Pan 16<.)

Johannes

I have used in my current setup the XLR outputs of The River and record the River as a stereo with its FX to my Metric Halo LIO-8 interface.
Newbie question:
I want to record a bass and other certain type of sounds as a mono. What is the best way to do that?

Happy Vacation

Thanks.

Yes I understood your guide and I will try it too.  I only mentioned how nice the panorama movements the individual voice pannings offers. Without being too artificial.

BTW I have edited  my previous post.

thanks

Thanks KazRemark and SugarFree

Ok. Narrowing the true stereo element by "dir.mix or new true panning pot" from wide to mono makes the stereo element better to fit in the mix spectrum. If I understood correctly? So no need to necessarily convert stereo to mono?  By using true panning or dir.mix the true stereo elements (differences in LR) does not lose the dimensions of the patch?

"Waves" quote:   "Often, stereo instruments fit better if you reduce their width. The narrower they are, the easier it will be to find a unique place---

SugarFree. I check your suggestion. BTW I have tested the panning voices of patch differenty and when playing it sounds really lovely.

EDIT
Conclusion
Now I have learned those basic ways to convert the recorded stereo to mono. And also by using true panning no need to convert to mono when you can narrow the true stereo element. Of course you need to listen what happens. And I also going to use wide River patches in some cases


thank you again

Thank you KazRemark for the good information.  I checked what the Logic Pro has and now I will try them.

What is the best way to record mono bass from the River.
Currently  I use The River's  XLR L/R  outputs into my audio interface stereo channel input.

I am asking because before the River, I have record only a mono synths.

Thank you. The River has so great ins outs  connection possibilities.

So it is easy. I record to my metric halo as a stereo LR enjoying the River FX too and then in the DAW I choice a mono track to record. Correct?
And if I want to record a bass or lead I can do it with a previous method. Correct?

The cable for the 1-8 individual outputs  can be a TS - balanced  XLR cable type?

Hi

I have used The River’s XLR L,R outputs when recording as stereo into my Metric Halo LIO-8 balanced inputs.
What is the best way to record mono? And with those River chorus and FX.
Is the L output the choice? Does left output combined both L,R output with the effects? Summing them to mono?

Johannes

Hi
I am the happy user of this brilliant and inspiring River synth. Now I have started to use Library Editor but I have some troubles.

Subject:  The River Library Editor 1.50 does not receive or send  to The River.  I use the USB Panel socket .

1. Library Editor application is on.  (I use theWine app)
2. I click the Recept-button in Editor to put it receiving mode. Then The River´s  Dump function. (current, singles, all, etc)
    The Editor does not receive nothing.

But Editors Load function works: it loads the syx files I downloaded from the SAS Baloran. Altought after I close the Editor app and open it later it also have not saved those files.

I also check that the USB Panel connections works with the "SysEx Librarian" and this program sends and receives between The River and my Mac.
Checklist:
1.  MacBook 10.12.
2. Midi setup correctly: PANEL@THERIVER
3. I use Wine app. (never used before)
4. Terminal says:
003a:fixme:midi:MIDIIn_MessageHandler Sysex data received but no buffer to store it!

Importan question:
Do I have to open the “TheRiverPatch.exe”   with unarchiver program? I tried but it won’t open