News:

SMF - Just Installed!

Main Menu

Version 1.50 major release

Started by Baloran, December 18, 2024, 11:06:41 AM

Previous topic - Next topic

Baloran

Version 1.50 is now available. This is a major release.
https://www.baloran.com/ThePool/Updates/ThePool_150.zip
It includes the following updates:
  • Addition of a Sub Oscillator in the A2D synthesis
  • In the A2D synthesis, addition of a Morphing mode between two wavetables. From my perspective, this is the most enjoyable mode to use with Wavetables: you select the starting timbre, the destination timbre, and modulate the transition between the two. With envelopes, it's incredible! ;)
  • Introduction of microtonality and compatibility with SCALA files. The KEY button now has two functions! ;) Exploring microtonality is like a journey through time and space. It's fascinating.

In the ZIP file, you will find a PDF file explaining the update procedure, along with a SCALA folder to copy onto the microSD of your The Pool. To do this, turn off The Pool, insert the microSD card into your computer, place the SCALA folder (without renaming it) onto the card, reinsert the microSD into The Pool, and turn the device back on. Press the KEY button to verify that the SCALA files are visible in the list.

Updated manuals can be found in the corresponding thread.

Thank you all and happy holidays!  :)

------------

La version 1.50 est disponible. C'est une version majeure.
https://www.baloran.com/ThePool/Updates/ThePool_150.zip
Elle intègre les modification suivantes :
  • Ajout d'un Sub Oscillateur dans la synthèse A2D
  • Dans la synthèse WT, ajout d'un mode Morphing entre deux tables d'ondes. De mon point de vue, c'est le mode le plus plaisant à utiliser pour les Wavetables: on choisit le timbre de départ, le timbre d'arrivée et on module le passage de l'un à l'autre. Avec les enveloppes, c'est terrible ;)
  • Ajout de la microtonalité et de la compatibilité avec les fichiers SCALA. Le bouton KEY a maintenant deux fonctions ;) Explorer la microtonalité est un voyage dans le temps et dans l'espace. C'est passionnant.

Vous trouverez dans le fichier ZIP un fichier PDF expliquant la procédure de mise à jour ainsi qu'un dossier SCALA à recopier sur la microSD de votre The Pool. Pour cela, éteignez The Pool, mettez la micro SD sur votre ordinateur, déposez le dossier SCALA sans le renommer dessus , remettez la micro SD dans The Pool et remettez The Pool sous tension. Appuyez sur la touche KEY pour vérifier que les fichiers SCALA sont bien visibles dans la liste.
Vous trouverez les manuels mis à jour dans le fil correspondant.

Merci à tous et joyeuses fêtes de fin d'année   :)

Markus

Great, I'm really looking forward to the update!
Thank you very much!

The update worked, but the Scala folder doesn't seem to be fully Mac compatible:
After update: All Cards, etc are on versions 1.5
When I press KEYB: just a blank screen

-The update did not copy the Scala folder to the SD card.
-I then copied it manually.The Scala folder is shown on the SD card, with the scl. data inside.
Autotune and Cards syc repeated.
Manual fine tuning of the keys works, but the Scala files are not displayed.... 8)






Baloran

#2
IMPORTANT

For version 1.50, if you used a MAC to copy the SCALA folder to The Pool's microSD, it's highly likely that the list of SCALA files is incorrect.
In this case, re-download the file
https://www.baloran.com/ThePool/Updates/ThePool_150.zip
and just update the panel firmware. Voice, FX cards and SCALA folder have not changed.

Pour la version 1.50, si vous avez utilisé un MAC pour copier le dossier SCALA sur la microSD de The Pool, il est fort probable que la liste des fichiers SCALA soit incorrecte.
Dans ce cas, re-téléchargez le fichier
https://www.baloran.com/ThePool/Updates/ThePool_150.zip
et faites juste la mise à jour du firmware du panneau. Cartes Voix, FX et dossier SCALA n'ont pas changé.

Baloran

Quote from: Markus on December 20, 2024, 02:06:17 PMThe update worked, but the Scala folder doesn't seem to be fully Mac compatible:
After update: All Cards, etc are on versions 1.5
When I press KEYB: just a blank screen
Corrected, thanks Markus !!!