News:

SMF - Just Installed!

Main Menu

Your wishes ;)

Started by Baloran, March 21, 2018, 01:11:35 PM

Previous topic - Next topic

Baloran

A wish, a function that you would like present in future versions?

A first proposed by Laurent, to start the sequencers arpeggiators with a pedal.

SugarFree

#1
#1 - A global option where the Channel and Voice buttons would indicate which mode is currently selected, without having to press S first.

When I program a sound, I have no use of switching between different layers or allocating voices. Being able to always see which mode has been selected for all the encoders would be very useful. Looking up this information on the tiny screen, or by pressing S is not as easy.
Pressing S, could show the Channel/Voice allocation.

SugarFree

#2
#2 - Low frequency range for OSC2, engaged by double double-tapping 32'. It would work as a 2nd analog LFO for FILTER CUTOFF modulation.
(for both INTERVAL KEY ON and KEY OFF mode)

SugarFree

#3 Pedal control for the S button.
Right now it only works with the S_KEY button, which doesn't help if you're actually playing the keyboard at the same time.

SugarFree

#4 - secondary function for [FM FILTER]: FM OSC1

SugarFree

#5 - A chromatic glissando mode for the Pitchbend Wheel

Baloran

Quote from: SugarFree on March 22, 2019, 11:59:33 PM
#2 - Low frequency range for OSC2, engaged by double double-tapping 32'. It would work as a 2nd analog LFO for FILTER CUTOFF modulation.
(for both INTERVAL KEY ON and KEY OFF mode)

Key Off (interval full right...) is not good for you ?

Baloran

Quote from: SugarFree on March 23, 2019, 02:06:56 AM
#4 - secondary function for [FM FILTER]: FM OSC1

Not possible sorry, it's hardware ;)

Baloran

Quote from: SugarFree on March 23, 2019, 12:06:38 AM
#3 Pedal control for the S button.
Right now it only works with the S_KEY button, which doesn't help if you're actually playing the keyboard at the same time.

Pedal 2 can be act as a Shift, it's not good ?

SugarFree

#9
Quote from: Baloran on March 25, 2019, 10:48:40 AM
Quote from: SugarFree on March 22, 2019, 11:59:33 PM
#2 - Low frequency range for OSC2, engaged by double double-tapping 32'. It would work as a 2nd analog LFO for FILTER CUTOFF modulation.
(for both INTERVAL KEY ON and KEY OFF mode)

Key Off (interval full right...) is not good for you ?

KEY OFF doesn't go slow enough as an LFO. Most of its FINE TUNE control is in the audio range. I'd like a similar range like the ANALOG LFO.

SugarFree

Quote from: Baloran on March 25, 2019, 10:51:33 AM
Quote from: SugarFree on March 23, 2019, 12:06:38 AM
#3 Pedal control for the S button.
Right now it only works with the S_KEY button, which doesn't help if you're actually playing the keyboard at the same time.

Pedal 2 can be act as a Shift, it's not good ?

Pedal 2 controls SHIFT_KEY not the regular SHIFT. This is a problem when I want to shift-control synthesis parameters while playing the keyboard.

Peter

If its possible, I would like to be able to lower the brightness of the two screens.
I found that I can change the colors and that helped a little, but lower brightness would also be nice for my eyes. :)



inbetweendays00

More memory slots ? Serait-ce trop demander, Maître ?
Thankssssssss.
François (n° 31 / Bruxelles)

Peter

Quote from: inbetweendays00 on October 29, 2019, 12:07:13 PM
More memory slots ? Serait-ce trop demander, Maître ?
Thankssssssss.
François (n° 31 / Bruxelles)
I agree, that would be most welcome.

Baloran

It's not possible (harware...) to add more memory slots.
For brightness, i must make test if i can init LCD with low brightness.